The most Requested features of the PowerLight 2 series have been upgraded to deliver "the ultimate analog amplifier", while the QSC Dataport ensures full compatibility with advanced digital processing and QSControl.net.
Three models range in power from 1250 watts to 4000 watts per channel at two ohms, all in two-rack space chassis That Are only 15.6 "(40 cm) deep and 22 lbs (10 kg).
In addition to higher power, the PowerLight 3 Series offers higher input voltage, selectable sensitivity, and Easily adjusted rear panel switches with color coded LED indicators.
For those users who simply want a high performance amplifier to go with Their Replace existing processor or console, the PowerLight 3 Series is an ideal choice, offering high power, excellent value, and zero signal latency.
When complete integration of amplifier control, monitoring and DSP is Desired, the PowerLight 3 Series is fully compatible with the QSControl.net BASIS networked audio platform, with its comprehensive drag and drop DSP functionality.
Simpler DSP requirements can be with with the DSP-4 processing module.
Features:
- PowerLight switchmode power supply for highest efficiency and improved audioPerformance
- Flow-thru air path and solid aluminum heat sinks for maximum cooling
- DataPort supports remote computer control and / or external DSP-4 modules
- Detented gain controls with 1 dB steps for precise calibration
- Removable knobs with lock-out security plate to preventDefault unauthorized tampering
- User defeatable clip limiters and selectable low-frequency filter per channel (3 Hz, 30 Hz, or
50 Hz)
- Three selectable input gains (26 dB, 32 dB, or 1.2 V)
- Front and rear panel LEDs indicate status of switch settings at a glance
- Parallel Dataport, XLR / M and XLR / F connectors for simple loop-through connectivity
- Neutrik Speakon ® and "Touch Proof" binding post outputs
- Neutrik Powercon ® power cable Remains secure on the road
- 3 year warranty plus optional 3 year extended service contract
- Class D output circuit re-doubles the output power with even lower losses and minimal increasement in average AC power, dramatically Reducing power distribution demands Compared to older high power amplifiers
Technical info:
Stereo mode both channels loaded:8 ohms EIA 1 kHz 1% THD 1500W
4 ohms EIA 1 kHz 1% THD 2500W
2 ohms EIA 1 kHz 1% THD 4000 W
Bridge mono mode:
8 ohms EIA 1 kHz 1% THD 5000 W4 ohms EIA 1 kHz 1% THD 8000 W
- 8 ohms Distortion 0.01-0.03%, 0.03-0.06% 4 ohms, 2 ohms 0.1%
- Maximum deformation 4-8 ohm 0.2%
- Frequency range (8 ohms) 20 Hz - 20 kHz, + / -0.2 dB
- Noise (20 Hz - 20 kHz, 32 dB Gain) -104 dB
- Dynamic Headroom (4 ohms) 2 dB
- Damping Factor (8 ohms) 200
- Amplifier Type Class D
- 26 dB input sensitivity setting 5.27V, 2.67V 32 dB
- Input Gain (1.2V setting) 39.1 dB
- Maximum input level 1.2V 10V setting (+22 dB)
- Power supply 230V AC 50Hz 11A
- Power connector CEE 7/7 16A with 32A Power Con
- Input impedance> 10k ohms balanced or unbalanced
- Variable speed cooling fan cooling from front to back
- Input 3p XLR male, 3p XLR Female, euro block
- 4p Neutrik Speakon outputs (channel 1 +2 parallel), screw connection
- Data port HD-15
- Controls on front on / off switch, volume control in 21 steps 1 dB / step
Indicators on front:
- Power blue- Yellow bridge
- Parallel orange
- Clip / security 2x red
- Level -10 2x orange
- Level -20 2x green
- Level -35 2x green
Indicators on back:
- Bridge feature yellow, green stereo, parallel orange- Gain / Sensitivity 26dB orange 32dB Green, 1.2V Yellow
- High pass filter per channel from 3 Hz, 30 Hz yellow, orange 50 Hz
- Clip limiter per channel, to yellow
- Protection against short circuit, overload, open output, overheating, RF protection,
on / off muting, DC fault with shutdown, active inrush delay
- 2U Dimensions height 8.9 cm 48.3 cm x width 19 "x depth 39.7 cm
- Weight 11 kg
- Approvals UL, CE, RoHS, FCC Class B